How to build an office cleaning schedule
An office cleaning schedule sets out what gets cleaned, where, when and by whom. Start with how people use each area. Agree what happens every working day, what fits into a weekly round and which jobs need a separate booking. Give spills and other unexpected work a named response route during opening hours.
Excel workbook with a blank schedule and a fictional worked example.
Start with the busiest parts of the building
Walk the site with the cleaning supervisor. Use the floor plan to mark the washrooms, staff kitchen, desks, meeting rooms, reception and routes between them. Ask when each area is busiest and when the team can get in. A meeting room booked back to back may need a reset between bookings. A locked meeting room may need an access arrangement before it needs any change in cleaning frequency.
For each area, write down the task, the agreed frequency or trigger, the day or time window and the person or team responsible. Name the exact room or surface where it matters. If reception, a landlord or office users share the work, give each team its own line so the handover is clear. In its tender for cleaning the council offices, Sevenoaks District Council asked for an area-by-area schedule of duties and times alongside its quality expectations and access arrangements. Sevenoaks District Council tender, section 1.3
Choose a frequency and give it a time
- Daily or each working day. Look first at shared washrooms, food and drink areas and busy entrances. Decide whether the work should happen before opening, after a rush or after closing. If you need a separate daytime visit, write down which days it covers and what that visit includes. Health and Safety Executive (HSE) guidance on workplace toilets and washing facilities calls for clean facilities. HSE guidance on toilets and washing facilities
- Weekly. Give work such as cleaning skirtings and accessible ledges a named day. Check that the team can reach them and has time in that shift.
- Periodic. Put occasional work such as carpet extraction on the calendar, with the zones and access agreed in advance. Use the floor finish, its care instructions and the condition you observe to choose the interval.
- When something happens. Set a route for reporting a spill, a heavily used room or an area the team could not enter. For a spill, name the team that can respond during opening hours and follow the site’s spill procedure. For routine floor cleaning, plan around foot traffic and use the agreed method for the floor. HSE guidance on cleaning and slips
Example for a hybrid office
This is a fictional one-floor office open Monday to Friday, 08:30 to 18:00. Attendance peaks Tuesday to Thursday. There is one staff kitchenette with a sink and microwave, and no commercial food preparation. A contractor cleans after closing and can provide a short washroom visit on peak days. The timings illustrate choices for this building.
| Area | Task | Frequency and timing | Who does it |
|---|---|---|---|
| Ground-floor washrooms | Clean toilets and basins, check supplies and top up as needed | Every working day after 18:00 | Evening cleaning team |
| Ground-floor washrooms | Check supplies and replenish where needed | Tuesday to Thursday at 13:30, after the lunch rush | Daytime cleaning team |
| Staff kitchenette | Wipe the shared worktop and sink | Every working day after 18:00 | Evening cleaning team |
| Meeting rooms | Clear cups and wipe the shared table | After hosted bookings, before the next booking | Meeting host |
| Open-plan office | Dust accessible skirtings along the main aisle | Friday after 18:00 | Evening cleaning team |
| Entrance carpet | Extract clean the matting zone | Quarterly, on an agreed Saturday | Specialist carpet cleaner |
| Entrance and corridors | Respond to a reported spill under the site procedure | On report during opening hours | Daytime site team |
Review what happens between cleans
Say who gets told when a task cannot go ahead, who rebooks it and how the change is recorded. If washroom supplies run out before the planned top-up, check stock levels, the timing of the visit and when the room is busiest. Those details give the facilities team and provider a specific change to agree. Record the new timing in the schedule and set a date to check whether it helped.
Use the schedule to plan the work. Put the agreed scope and expected condition in the specification, then use the audit checklist to decide what to examine and how to record it. A completed schedule entry is the team’s record of work. A dated observation can help explain what was found at a particular time and place. Cleaning contract specification checklist · Cleaning audit checklist